喷涂型聚氨酯漂浮护舷采用当今世界上最先进的喷涂聚脲弹性体技术生产，该技术是国外近十年来开发研制的一种新型无溶剂、无污染的绿色施工技术，产品特点如下：

1、芯材为闭孔高回弹泡沫，质量小，吸能性好。芯材为闭孔高回弹泡沫式固体，即使破损也不会沉底。

2、外皮保护层－喷涂型聚脲弹性体（SPUA）被称为耐磨橡胶其耐磨性是碳钢的10倍，是环氧树脂的3-5倍；耐油性与丁腈胶媲美；拉伸强度、伸长率、撕裂强度在户外暴晒四年后，基本保持在初始强度状态；

3、普通管道防腐材料如熔结环氧粉末的耐盐雾试验一般不超过500ｈ，实际使用寿命在10年以下；0.5ｍｍ喷涂型聚脲弹性体10000ｈ盐雾试验无任何腐蚀现象，预计使用寿命高达50年以上。

4、聚脲保护层为芳香族涂层体系100％固含量，不含任何挥发性有机物，暴露在紫外线下需要很高稳定性、耐候性好；可在120℃下长期使用，具有良好的热稳定性。

5、聚氨酯漂浮护舷重量轻，护舷变形量大，适应性强，倾斜压缩性能好，它与一般橡胶护舷相比吸收能量大，而产生的反作用力小

6、性能可靠，安装方便，保养费用低，美观实用。

7、ＳＰＵＡ喷涂技术生产护舷克服了使用模具的局限性，在制作中不受产品尺寸限制，满足客户对制品的不同尺寸要求

Choose Helen trust Helen

Spraying polyurethane the foam fender used in today's world the most advanced polyurea elastomer production technology, this technology is nearly 10 years abroad developed a new type of solvent free, no pollution green construction technology, the product features below:

1, core material for closed pore high rebound foam, quality is small, can absorb the gender is good. Core material for closed pore high elastic resilient bubble solid, even if damaged also won't sink.

2, skin layer-spraying type polyurea elastomer (SPUA) is called wear-resisting rubber the wear resistance is 10 times as much carbon steel, epoxy resin is the 3-5 times; Oil resistance and butyl rubber rival; Tensile strength, elongation, tear strength in outdoor exposure after four years, basic keep in the initial strength state;

3, normal pipeline corrosion materials such as melting and resistance of epoxy powder, salt fog test generally no more than 500 h, the actual service life in 10 years the following; 0.5 mm spraying type polyurea elastomer 10000 h, salt fog test without any corrosion phenomenon, is expected to use life is as high as 50 years.

4, polyurea protection layer coating system for aromatic 100% solids, do not contain any volatile organic compounds, exposure to ultraviolet rays (uv) need high stability, high; But in 120 ℃ long-term use under, good thermal stability.

5, polyurethane the foam fender light weight, fender large deformation, the adaptability is strong, tilting the compression performance is good, it and general rubber fenders absorb energy compared, and produce reaction of small

6, reliable performance, convenient installation, maintenance costs low, beautiful and practical.

7, SPUA spraying technology production fender overcome the limitations of the use of mould, in the production from product size limit, meet customer requirements of different sizes of products